water pipes connected to the water heater. insulation BlanKets Insulation blankets are available to the general public for external with an insulation blanket. • Do not cover the instruction manual. Keep it on the side of the
*Water heater dimensions prior to installing insulation blanket that is included with water heater. 81SVB30-2 – The insulation blanket adds 1-1/2 inches to tank height and 3 inches to tank diameter.
Purpose of an insulation blanket is to reduce the standby heat loss encountered with storage tank water heaters. water heater to the outside wall surface is 22 in. (560mm), and the maximum height of “H” is 12 ft. (3.66m). TO BOTTOM
R-10 Insulation Value Yes No Still in use after 50 years Yes No blanket, heat gained from the sun is retained and water costs if you use a gas or heat pump pool heater. Pool water temperatures typically range from 78
The Best Boiler for Most Homes The ES2 was created with a single goal in mind which provides blanket protection on parts and labor for 5 or 10 years from the date of installation. water heater with every boiler application.
Lasting water heater unit. All units are periodically tested by an independent laboratory •High density blanket insulation. ALL THERMA-FLOW OIL FIRED WATER HEATERS ARE EQUIPPED WITH: •Quality, fuel efficient Beckett or Carlin flame retention burner.
water heater and furnace, plus an optional oven, insulation (R-7): Prevents insulation from sagging over time (vs. blanket– the best and most comprehensive warranty program in the industry. Every Jayco RV undergoes rigorous quality
If the water heater has an Insulation blanket around the outside of the tank, it should be removed and reinstalled after the bracing system is completed. Water Heaters on a Raised Platform The plumbing code requires that a gas water heater located in a garage must have the pilots,
The insulation of the heating element. • DO NOT submerge control in water. • DO NOTdry clean your heated product. 2 Place blanket/mattress pad/throw into the dryer and tumble dry for 10 minutes at a low temperature.
• Do not apply insulation to the top of the water heater, as this will interfere with safe operation of the draft hood. • Do inspect the insulation blanket frequently to make certain it does not sag, thereby obstructing combustion air ﬂ ow.
THE BEST GETS BETTER. 1. bubble foil insulation and R-7 blanket insulation. Puncture-resistant PolyFlex™ and bubble foil insu-lation line the underside of the ﬂooring. Holding Water heater bypass system
Insulate your water heater. For best results, wrap insulation around both the cold and hot water pipes entering the tank. insulation blanket . Protect your family from carbon monoxide poisoning appliances inspected by a trained profes-
Water Heater Installation Instructions and Use & Care Guide To obtain technical, warranty or service assistance during if the thermostat(s), or surrounding insulation has been exposed to water in any way. Immediately call a qualiﬁ ed