Blue media funnel for adding the Chemsorb media . off the power to the water heater before beginning installation in case water heater is accidentially drained. If there is a lot of sediment in the water, you might want to set to backwash every 1 to 3
BLUE FLAME VENT-FREE PROPANE/LP GAS HEATER OWNER’S OPERATION AND INSTALLATION MANUAL CG6P CG10P Gas water heater* _____ Btu/Hr going into heater controls. If sediment trap is not installed or is installed wrong, heater
The diff user dip tube helps reduce sediment buildup inside the water heater tank to A tough, thick, durable coat of blue cobalt ceramic is fused to the tank’s interior surfaces at 1600°F, forming a corrosion-resistant lining for years of dependable protection and use.
Water Heater Troubleshooting A natural gas flame should be a bright blue with the tip of the flame having Clear tank of any sediment first. • If elements test OK, check for power at upper electrical upper thermostat.
Blue Diamond? The water heater is the most frequently used appliance in any home and accounts for an estimated 20% of the total yearly energy budget. sediment buildup in the tank. C3 Technology™ Gas Water Heater Design meets ANS Z21.10.1 standards
Water Heater HSE-SCJ-006 / HSE-SCJ-010 Size: 210mm (H) x 148mm (W) Scale and sediment build-up on the surface of the element can lead to Connect the cold water pipe to the inlet [Blue Cap]. 4. Connect the hot water pipe to the outlet [Red Cap].
Serving the water heater, and • A drip leg (sediment trap) ahead of the gas control valve/thermostat to help prevent dirt and foreign materials from entering the gas control valve/thermostat. • A ﬂ exible gas connector or a ground joint union between the shut
Of any indirect fired water heater in the industry. System—Cold water inlet sediment reducing device. Helps prevent sediment build-up in tank. Increases first hour delivery of hot water while minimizing temperature build-up at top of tank.
BLUE DIAMOND® GLASS COATING SEDIMENT-CLEANING SYSTEM Specially designed dip tube directs incoming cold water to create turbulence in the tank, which reduces lime and sediment buildup. built into the water heater base. In addition, a thermal cutoff (TCO)
Installing a Gas Water Heater sediment and are heavier than new ones. Step Five Both have arrows showing the correct direction for installation. 2. Attach the blue-coded fitting to the cold water inlet with the arrow facing into the water heater. 3.
The water heater is installed and operated as a conventional water heater. When there is a demand for Reduction System—Cold water inlet sediment reducing device. Helps prevent sediment build up in tank. Increases first hour delivery of hot water while
If your pilot model water heater is not operating properly, first check if the stove or other flame can be seen when the exterior cover is opened and it should be a nice blue color. sediment or in severe cases,
BLUE FLAME NATURAL GAS HEATER SAFETY INFORMATION Gas water heater* _____Btu/Hr Gas going into heater controls. If sediment trap is not installed or is installed wrong, heater may not run properly. WARNING: This appliance re-
The diffuser dip tube helps reduce sediment buildup inside the water heater tank to ough, thick, durable coat of blue cobalt ceramic is fused to the tank’sA t interior surfaces at 1600°F, forming a corrosion-resistant lining for years of dependable protection and use.