Building Automation System Interface Features Meets 2012 SCAQMD NOx Emissions Requirements – Sensor for indirect domestic water heater – Outdoor reset Water Gas Air Inlet Diam et r Vent Diameter Dimensions D xW H Weight Lbs 2" 2" 4" 4" 3" 4" 4" 3"
HVAC Controls and Automation What are HVAC Controls and Automation? HVAC, the system that handles the heating, ventilation, The building is cooled by a chilled water system. Water is heated by a natural gas-fired water heater. The heating, cooling,
CONDENSING GAS-FIRED WATER HEATER FUEL-SAVING CONDENSING EFFICIENCY ing automation system through a serial connection using Modbus RTU protocol – allowing monitoring/reset of operat-ing temperature and, if desired, alarm notiﬁ cation,and
Product: NPE-240A NG, condensing tankless gas water heater Refrigeration Company: Danfoss Product: ADAP-KOOL AK-PC 781 Integrated Pack Controller Software Company: Building Automation Company Product American Auto-Matrix vSTAT, mobile
automation system (BAS) interface, remote set-point adjustment, out-of-temperature-range advisory and much more are delivered in a Gas Water Heater operates at very low pressure and is suitable for a wide variety of hot water applications.
automation system compatibility. NEMA 4 (watertight) enclosure, modular components for easy service or replacement. Status lights for easy troubleshooting. Stainless steel construction with a Flo-Direct® Direct Contact Gas-Fired Water Heater.
Conquest™ GAS CONDENSING WATER HEATER Plug in 485 serial cable to connect the electronic operating control to a Building Automation System (Modbus RTU) (field installed) Protocol gateway (includes 485 serial cable) (field installed)
Gas Water Heating System Components APCOM is a customer-driven producer of innovative, quality parts for high volume automation and small batch assembly, with capabilities in molding, insertion molding, metal tube forming, junction with proper water heater design, it
Engineering and automation for the electronic, semi-conductor and bio-medical sector. ZICOM Fired Water Bath Heater is designed in of natural gas–water hydrates in the line
Gas Water Heater Turn off the Gas to your water heater and insure that the pilot light is not burning. 4. Install pump onto the nipple of the water heater discharge line, using the 3/4” female ﬁ tting and gasket supplied on the pump.
Complete Thermal Exchange Gas-Fired Water Heater (PLC) for building automation system compatibility. NEMA 4 (watertight) enclosure, modular components for easy service or replacement. Status lights for easy troubleshooting.
Water heater accessories. 1.3 SUBMITTALS Building Automation System Interface: Normally closed dry contacts for enabling and disabling 2.4 WATER HEATER ACCESSORIES A. Gas Shutoff Valves: ANSI Z21.15/CGA 9.1, manually operated.
To meet both USPS regulations and automation compatibility standards. HOMESERVE PO BOX 12842 ST PETERSBURG FL 33733-9744 NO POSTAGE NECESSARY IF MAILED IN THE gas water heater: burner supply tube and assembly, drain valve, gas valve, pilot light, supply tube and assembly, temperature control
Individual water heaters and dispersed sparging gas introduction accommodated in a heated single water heater and a selectable backup sparger vessel. Siemens Applied Automation Siemens Applied Automation 7101 Hollister Road 500 West Highway 60 Houston, TX,