STEP NO.2:Install a tee in the hot-water riser between that hot The water heater is typically located in these areas, with the copper or CPVC water-supply line. *The plumbing code in Massachusetts, for example,
DO NOT install this water heater with iron piping. The system should be installed only with piping that is suitable for potable (drinkable) water such as copper, CPVC, or polybutylene. DO NOT use PVC water piping. DO NOT use any pumps, valves, or fittings that are not
Water heater information Hot Water Heater T&P Valve Every water heater, gas or electric, should have a temperature and pressure relief
Commercial Pool Heater Commercial Pool Heating Applications CPVC Pool Water Connections Expansion Tank Cupro-Nickel Pool Heat Exchanger Pressure Reducing
INSTALLATION INSTRUCTIONS Venting for Direct-Vent Water Heater DANGER: Failure to properly vent the water heater to the outdoors as outlined in this Venting section will result in death or serious
3/4" CPVC Drain Line (Provided by others) Maximum Height = 21' For Vent Heights Greater Than 5', Mount the water heater securely on the wall and install the Horizontal Discharge Adapter, aligning the outlet opening with the vent termination hole. 22)
install water heater according to clearances stated on the heater. Adequate clearance for servicing this appliance should be considered before installation, such as changing the anodes, etc. One 3” CPVC Schedule 80 – 90° elbow; used to connect the outlet
DO NOT install any water heater with damaged components. If damage is evident then please contact the supplier where CPVC or ABS Gas Supply Pipe Minimum 1/2" NPT (schedule 40 black iron pipe recommended) Minimum Clearance for Servicing
A tank less water heater. That’s no surprise — this slug of cold water, some plumb-ers may install a tempering tank CPVC and ABS. All are far less expensive than stainless steel.) The thermal efficiency (TE) of a condensing storage
POWER VT PLUS WATER HEATER MODELS (40 then use 3/4” CPVC pipe to plumb from the heater condensate outlet to economizer Tee, to a 3 route the piping downward until the standing water in the trap is not higher than the bottom of the water heater. 4. Install the condensate plumbing as
Qualified and experienced professionals to design and install the hot water delivery systems in How efficiently a water heater can convert electricity or natural gas CPVC, and cross-lined polyethylene (PEX) are the most commonly used types.
RESIDENTIAL WATER HEATERS THESE REQUIREMENTS ARE FOR PERMITS ISSUED ON OR AFTER JANUARY 1, 2014 BUILDING DIVISION REQUIREMENTS A plumbing permit is required for the replacement of an existing water heater.