NEW YORK STATE ENERGY CONSERVATION CONSTRUCTION CODE Part 6 Compliance Form A Thermal Rating of zero or greater indicates that the building envelope Gas/oil water heater separate valve XII. ELECTRICAL & LIGHTING SYSTEMS AND EQUIPMENT:
NY 11433 TEL.: 1-718-291-8400 and 1-888-OK-NATCO FAX: 1-718 A water heater should always be located in a area with a floor drain or installed in a drain pan suitable to provide additional energy savings and prevent the thermal siphoning of domestic hot water. Refer to pages 22 to 26
A heat pump water heater (HPWH) is into thermal energy to heat the water. Since the HPWH moves rather than generates heat, the COP can be much higher than unity. A small capacity tion, New York. Contact: Glen Davis at 716-724-8152
CSI-Thermal Program Inspection Checklist is based on the Solar Rating and Certification (SRCC) Operating Guidelines (OG) 300, as referenced in column A. line from the auxiliary water heater to the farthest accessible point
Drafted boiler and only a water heater remains vented through the chimney. The interior opening NY THERMAL INC. LX150E 93.5 150 NY THERMAL INC. LX200 93.5 199 NY THERMAL INC. LX300 93.7 275 NY THERMAL INC. M100 93.5 150 NY THERMAL INC. M100V 93.5 150
water heater shall be provided with an opening and unob-structed passageway large enough to allow removal of the means of controlling thermal expansion. 504.4.1 Installation. Such valves shall be installed in the shell of the water heater tank.
The Matrix, which incorporates a condensing water heater, furnace and boiler, heat recovery ventilator, and which is pre-wired for air conditioning, is a NTI (NY Thermal Inc.) 506-432-1130 . Title: Microsoft Word – NTI_Matrix_EKOAward_Jun1308.doc
Innovation Water Heater Management System (WHM) technology and a thermal shock-proof • BLAUVELT, NY 10913 (845) 580-8000 • FAX (845) 580-8090 www.aerco.com Represented By: Specifications subject to change without prior notice.
COMMERCIAL OIL FIRED WATER HEATER FOR HOT WATER SUPPLY New York, NY 10038. • The National Electrical Code, NFP A No. 70. Availability same as NFPA Standard No. 31. may develop due to the thermal expansion of heated water causing
Water Heater Installation Instructions and Use & Care Guide To obstain technical, New York, NY 10018 which will contaminate the potable water supply. Closed System/Thermal Expansion Typically, a closed system includes a pressure reducing
Water Heater INSTALLATION Association, 85 John Street, New York, NY 11038. The latest version of the National Electrical Code, NFPA No. 70. Thermal expansion occurs in any hot water system when system water is heated or “recovered” during
New York, NY 11038. Note: water heater and system are filled with water and all air is expelled. FILLING 1. Close the heater drain valve by turning handle clockwise. 2. thermal expansion of water in a closed water supply system, or it
Drafted boiler and only a water heater remains vented through the chimney. The interior opening NY Thermal LX150E 93.5 150 NY Thermal LX200 93.5 199 NY Thermal LX300 93.7 275 NY Thermal M100 93.5 150 NY Thermal M100V 93.5 150 NY Thermal TFT175 94.8 175
Heater 1 – Water Heater 2 – Tankless Manuf. Area , NJ; Philadelphia, PA; Monticello, NY. 001-01/13 Gas-Fired Water Booster Heaters Capacity – MBH Incentive ≤100 MBH $35 per MBH >100 , $300 per tankless water heater 90% Thermal Efficiency Gas Water Heaters > 50 Gallons