Expanded water within a water heater when a backflow device is installed on the heater inlet. The Cash Acme TE Tanks feature materials suitable for use with potable water. † Welded construction: Ensures long and reliable service.
May result in minor or moderate injury. NOTICE: Attention is called to observe a specified procedure or maintain a specific condition. plate of the water heater to be certain the power supply corresponds to the water heater requirements.
1 EF – Energy Factor 2 TE – Thermal Efficiency New Water Heater Equipment Information Equipment Type (Tankless, Storage, or Condensing) Install Date Manufacturer/Brand Model Number EF1 TE2 Location Total Cost
But do not agree with the over 20 gallon TE criterion only being 0.80. First of all, an EF of 0.75 is not equivalent to a TE of 0.80 (80%) – it is a higher efficiency level. even if the tankless water heater is installed on a wall,
WATER HEATER R E b TE A 1174617079 800-894-9599 www.MIDAMERICANENERGY.com. MidAMERiCAn EnERgy WATER HEATER REbATE Equipment application Select equipment based on the energy ratings and terms and conditions shown on the Residential Rebate Schedule.
Energy Factor (EF) or Thermal Efficiency (TE) Electric Water Heater Rebate: $50 If a new water heater is installed in a newly constructed home, the customer may apply for the water heater rebate or the new home construction rebate, but not both.
water heater will provide more capacity than the heat pump compressor. Therefore, to maximize output (at the expense of efficiency), the resistance elements are favored in this test. Interestingly, despite preparing the water heater per the DOE conditioning pre-draws, the tank
All technIcal and warrantY questIons: SHOULD BE DIRECTED TO THE LOCAL DEALER FROM WHOM THE WATER HEATER WAS PURCHASED. Te mperatures heater status descrIptIon/actIon dIsplaY Select Heater Status from the Main Menu and press the Operational
Water Heater Highlights ENERGY STAR Products Partner Meeting October 23, 2012 . Today’s Agenda • Program Milestones & Updates 0.94 TE and maximum Standby Loss, which is 16% more stringent than the federal minimum requirement
Thermoelectric Generator Using Water Gas Heater Energy for Battery Charging The TE modules are applied in the water gas heater permutation chamber as showed in figure 5, where the hot side (aluminium block) is in contact to the flame of the burn
Water heater must have a Thermal Efficiency (TE) of 90% or greater. Water heater must be power-vented. The following models have been verified as eligible for this reward by the Focus on Energy Home and Water Heating Program. Additional requirements apply.
Thermal Efficiency (TE) Purchase date (Yr/Mth/Day) Total cost To what degree did the rebate affect your decision to purchase a qualifying water heater? qualifying water heater submitted under this program and accepts