FVIR WATER HEATER CLEANING PROCEDURE This procedure applies to Atmospheric and Power Vent water heaters that (household cleaning brush). • Flashlight. • Small mirror 2” X 3”. • 3/8”, 7/16”, and 3/4” inch open end wrenches.
Fruit-and-vegetable wash is not necessary to get your produce clean. Gently rub produce with your fingers while holding it under running water. For sturdy items, use a clean scrub brush.
The water heater. Filter Installation 1. maintain unrestricted airflow to the water heater. Periodic Cleaning of the Filter 1. or a soft bristle brush to remove it. NOTE: If unable to inspect or clean the flame trap from underneath, follow the “Cleaning the Combustion
ProHeat 2X™ is the new revolutionary new cleaning system featuring: leaves your carpets beautifully groomed Heats hot tap water up to 25 degrees hotter for maximum cleaning. Now heats through the attachment hose too! Edge to edge cleaning and • Brush is noisy (rattles)
HotWater101: Filter Cleaning for Gas Water Heaters Most residential water heaters produced after 2003 have a If the water heater is in a drain pan, use a brush with a flexible handle using an in and out motion and vacuum the brush.
FVIR WATER HEATER CLEANING INSTRUCTIONS To perform the cleaning instructions below the following tools are needed: Brush soapy water on the gas connections and look for bubbling. This is an indication of a gas leak. If bubbles appear, shut off gas supply
Soft bristle brush Utility brush – small soapy water to clean outside of heater. 4. Do not submerge control valve in water. Cleaning Instructions, Pilot Replacement and Valve Change odel No. 233010 3 For assistance call: 1.800.762.1142
CARING FOR YOUR WATER HEATER Care and Cleaning DANGER: Shock Hazard – Make certain power to the water heater is OFF before brush. CAUTION: Do not overtighten the water filter. Overtightening can deform and/or damage the filter.
Soft bristle brush Brass brush Heavy-duty pipe cleaners soapy water to clean outside of heater. 4. Do not submerge control valve in water. Cleaning Instructions for Burner, Pilot ssembly, and mitter Screen Series: 220000-450000 3
FVIR WATER HEATER CLEANING INSTRUCTIONS To perform the cleaning instructions below the following tools are needed: • Vacuum cleaner with crevice and brush attachments.
Small electric shaver cleaning brush, a can of compressed air (available from most You can now lift off the heat exchanger from the heater body. If your tub has water in it, you can leave the heat exchanger attached to the tub, but
CARING FOR YOUR WATER HEATER Care and Cleaning DANGER: Shock Hazard – Make certain power to the water heater is OFF before removing use a soft brush. CAUTION: Do not overtighten the water filter. Overtightening can deform and/or damage the filter.
• Small/tooth brush and the tube flag clean of debris and solvents from the heater cleaning process. 4. a folded KimWipe to access these tight regions of the heater coil. Rinse well with distilled water to remove the baking soda.
1 FVIR C3 WATER HEATER FLAME ARRESTOR CLEANING INSTRUCTIONS INCLUDED IN THIS KIT: • Wrap-around style ﬁ lter (with clips) • Flexible cleaning brush
Your water heater is built to the current industry safety standard and meets all FVIR (flammable vapor ignition resistant) requirements. arrestor, use a common household cleaning brush that will pass through the air intake opening at the base of the heater and extend into the heater 2/3 the