28 Flue Damper Copyright© by American Water Heater Company 2005. All rights reserved. DCG3-80T199 DCG3-100T199 DCG3-100T270 DCG3-75T125 DCG3-80T399 Model Number Copyright© by American Water Heater Company 2005. All rights reserved.
If your water heater was shipped with a flue damper, it must be attached to the flue collector and interconnected to the ignition control module before proceeding with start-up. Flue Damper Installation a. Set the flue damper over the flue collector opening
A.O. Smith Water Heater Parts MODELS BTR(C) 20 THRU 400A: STANDARD AND ASME (A) SERIES 8, 9 PRINTED 0507 197284-001 2 Damper Drive Assembly 8 6 26 ITEM PARTS DESCRIPTION BTR 20 BTR 54 BTR 80 BTR 97 BTR 98 1..Flue Baffle
Residential Gas Water Heaters FEATURES AUTOMATIC FLUE DAMPER Increases efficiency as it auto-matically opens and closes to reduce heat loss in the Heater operates with an automatic pilot relight system that shuts off the pilot during
damper gas water heaters meet or exceed • 24 VAC flue damper, 110 VAC outlet required • Includes 19-foot cord, 3-prong plug • Standard Cat. • Disables the heater in the presence of flammable vapor accumulation Longer Life
Water Heater with Damper Honeywell Temperature Control System Sequence of Operation Thermostat calls for heat. Thermostat supplies 24 volts to damper. Damper opens supplying 24 volts to the ignition module.
Specifications and materials may change without notice. Effective for all Prodigy 5 water heaters manufactured and sold after 1st January 2012.
A water heater with a buoyancy operated flue damper must also demonstrate compliance with existing appliance safety standards [GAMA, No. 5 at 6]. water heater with a standard flue pipe and vent system to 84%. Using corrosion resistant heat
Flue outlet placement is of utmost importance for maximiz- the desired draft at the water heater. A barometric draft damper is not recommended on Bock oil-ﬁred water heat-ers unless excessive draft is encountered; -.07 W. C., or greater.
Part Number 317926-000 COMMERCIAL Printed in the U.S.A. – 0810 SERVICE HANDBOOK SandBlaster ® Self Cleaning Commercial Gas Water Heaters with Flue Damper and Electronic Ignition
1 Do not store or use gasoline or other flammable vapors and liquids in the vicinity of this or any other appliance. WHAT TO DO IF YOU SMELL GAS
Residential Gas Water Heaters FEATURES AUTOMATIC FLUE DAMPER Increases efficiency as it auto-matically opens and closes to reduce heat loss in the
1 This water heater complies with ANSI Z21.10.1-current edition regarding the accidental or unintended ignition of ﬂ ammable vapors, such as those emitted by gasoline.
Commercial Flue Damper Millivolt-Powered Energy Saver Gas Water Heater The water heater shall be a Bradford White model with a rated storage capacity of not less than_____gallons (_____liters), a minimum gas input of
John Wood® ENERGY STAR® qualified Atmospheric Vent gas water heaters comply with the latest ENERGY STAR® qualifications. With an installed flue damper, higher efficiencies
The purpose of venting a gas or oil-fired water heater is to completely remove all products of combustion and to vent or temperature), barometric damper and flue connectors de-signed to exhaust combustion gases through the side wall of
Energy Saver Gas Water Heater The Commercial Flue Damper Models feature: The water heater shall be a Bradford White model with a rated storage capacity of not less than_____gallons (_____liters), a minimum gas input of
150158 rev. 2 august – 2010 operating, installation and service manual commercial gas water heater with flue damper and electric ignition system without fan motor