Or the water heater it self, may develop leaks. It TROLUSED ON YOUR WATER HEATER. REFER TO ILLUSTRATIONS ON PAGES 8 & 9. WARNING:Should overheating occur or the gas supply fail to shut off, turn off the manual gas valve to the appliance.
Fairly common — and a few not-so-common — water leaks. How can you be sure your inspection will be as thorough as possible? The checklists cover three areas: not-so-common indoor leaks things to check water heater tank The pressure valve release could be stuck. This valve is most often
Operating Your Water Heater result, causing leaks. Do not insert any sharp objects into the inlet or outlet connections. Damage to the gas control valve/thermostat may result. 29 Replacing the Gas Valve: 1. To replace the gas control valve/thermostat,
Or the water heater itself may develop leaks. IT IS THERE- Power venting is an option on your water heater. A power venter kit is available for every model. Please consult with the company for more details. FOR YOUR SAFETY READ BEFORE LIGHTING
Find drips and leaks If you’ve got a dripping hot water faucet or shower, you’re paying to heat can do to maintain your electric hot water heater WHEN IT’S TIME TO BUY When it’s time to buya new dishwasher or clothes washer, look for ENERGY STAR.
CARING FOR YOUR WATER HEATER CAUTION: Do not tap or force the filter during removal. This can deform and/or damage the filter. t Check all gas and water pipes for leaks. See page 55. NOTICES: – DO NOT operate the water heater if you feel
For do-self repairs INSTALLING A GAS WATER HEATER While it appears to be a complex job, installing a water heater is really quite straightforward. water for leaks. To attach the water lines, first install dielectric unions on the heater.
your.water.heater.properly ..A.little.preventive.care.on.your.part.can. Repair any leaks before allowing the water heater to operate. DANGER: Failure to install the blower assembly and properly vent the water heater to the outdoors as
Ing, leaks from the water heater itself can damage property and could cause a ﬁ re risk). If the water heater T&P Relief Valve that came with your water heater. Do not reuse an old T&P Relief Valve. Install a T&P Relief Valve
Checking Your Meter for Mysterious Water Leaks 1. Locate the water meter. It should be near the street under a metal, plastic, or concrete lid. The water meter is your indicator of water use. When water is not being used, nothing on the meter should
Must shut your water off, please do so at this cut-off valve, water heater, basins, washer, and dishwasher. have leaks in your system, they may not be noticeable unless your system is running. Turn your controller on
your water heater, get help from a qualified person. Because circuit breakers can be mismarked, always Check the water connec-tions for leaks. Most leaks are due to problems with the inlet or outlet water connections (not a tank leak).
Find water leaks or breaks with these simple sleuthing tools: Record the values on your water meter. c) Do not use water for an hour. d) Turn on your water and power to your water heater only after water service is restored.
Valve should be used with your water heater. Do not use an Smell around the water heater to ensure there are no gas leaks at the gas control valve or in the supply gas line or for any other type of flammable vapors in the area. 3.
Water connections tight and free of leaks. Gas line equipped with shut off valve, union and sediment trap. Properly maintained, your water heater will provide years of dependable trouble-free service. It is recommended that a periodic
Possible leaks. To Fill the Water Heater Make certain that the drain valve is closed, then open the shut-off valve in the cold water supply line. Properly maintained, your water heater will provide years of dependable trouble-free service.
Of your water heater unless it is specifically recommended in this manual. All other servicing should be referred to a qualified Water connections tight and free of leaks. Power Supply voltage agrees with water heater rating plate.